RUCKUS

 
     
    1 - 120 of 207 items
    Password JDM Ruckus / Zoomer Ultimate License Plate Frame - BLK Password:JDM Ruckus / Zoomer Coolant Reservoir (Black) Vee Rubber Brand Tubeless Tire size 90/90-10
    Password JDM Ruckus / Zoomer Ultimate License Plate Frame - BLK Password:JDM Ruckus / Zoomer Coolant Reservoir (Black) Vee Rubber Brand Tubeless Tire size 90/90-10

    Forget about all the other license plate frames out there, because no matter how they mount the plate they still have only one position. Your pals at Password:JDM designed the Ultimate License Plate frame for the Honda Ruckus to be as individual...

    Introducing the Password:JDM Billet Aluminum Coolant Reservoir for the Ruckus/Zoomer scooter. Each reservoir has been machined from a single piece of solid billet aluminum, and features an anodized finish with a laser etched logo. This reservoir...

    Vee Rubber Brand Tubeless Tire size 90/90-10 with VRM-134 tread pattern for a variety of Street-Legal Full-Size Scooters.

    $44.99

    $109.99

    $28.99

    150cc 4-Stroke Long-Case GY6  Motor Engine 3.50-10 K453 Kenda Brand Tire 5 PIN RECTIFIER
    150cc 4-Stroke Long-Case GY6 Motor Engine 3.50-10 K453 Kenda Brand Tire5 PIN RECTIFIER

    150cc 4-Stroke Long-Case GY6 Gas Engine with automatic CVT transmission. This scooter engine is used in a wide variety of applications, including full-size street legal scooters, all terrain vehicles (ATVs), dirt bikes, and go karts. Compatible...

    Kenda Brand Tubeless Tire size 3.50-10 with K453 tread pattern. Kenda's newest sport tread for performance-based scooters. ***Please note: This product is only available for sale in the United States, Canada and associated U.S. Territories.***

    5-pin regulator/rectifier for vehicles with up to 250cc 4-stroke engines. Electrical items are non-returnable, please check photos and specifications before ordering. 12 volt regulator 5 wire connection, 2 plugs all female Wire Length: 7½ inches

    $329.00

    $39.00

    $23.25

    7 PIN RECTIFIER 78 " SLIDE THROTTLE CABLE 90 DEGREE BOTH ENDS 85" Throttle Cable for Honda Carb stetched CVK
    7 PIN RECTIFIER78 " SLIDE THROTTLE CABLE 90 DEGREE BOTH ENDS85" Throttle Cable for Honda Carb stetched CVK

    7 Pin Regulator/Rectifier for 150cc and 125cc 4-stroke QMJ152/157 QMI152/157GY6 engine based scooters. This 7 pin plug is commonly found on "Tank" brand 150cc Chinese scooters. Electrical items are non-returnable, please check photos and...

    78 INCH BLACK THROTTLE CABLE MEASURED FROM BEND TO BEND. ADJUSTER CABLE BUILT INTO CABLE.

    SEE PICS FOR ALL THE DETAILS

    TESTED AND MADE IN THE U.S.A.

    FREE SHIPPING TOO.

     

    Throttle cable with a 85" sleeve, 45 degree angle mount.  If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb

    $22.50

    $35.00

    $18.99

    Aluminum 90 DEGREE Bent Valve Stem Set ATR DAN MAXX GY6 WIREHARNESS REPLACMENT RELAY 2 TYPES ATR RUCKUS GY6 ENGINE SWAP HARNESS IN STOCK
    Aluminum 90 DEGREE Bent Valve Stem Set ATR DAN MAXX GY6 WIREHARNESS REPLACMENT RELAY 2 TYPES ATR RUCKUS GY6 ENGINE SWAP HARNESS IN STOCK

    Aluminum 90 Degree Bent Angle Tire Valve Stem Set - Available in Black or Silver. Outer Diameter (where stem mounts): 10mm

    LOOKING FOR THOSE HARD TO FIND RELAYS THAT ATR AND DAN MAX GY6 HARNESSES USE. WE HAVE THEM IN STOCK

    PLEASE LOOK AT THE PART NUMBER ON TOP OF THE RELAY. ALL SHOULD HAVE 8 PRONGS.

    TWO RELAYS TO CHOOSE FROM: MY2N-J OR LY2NJ 12VDC

    ATR plug and play GY6 engine harness will eliminate the need to fuzz around with wiring your engine swaps! Reduce the chances of errors and problems. Pre-labeled and ready to go! COMES WITH CDI TOO Please take a look at the drop-down menus for...

    $10.99

    $9.99

    $175.00

    AUTHENTIC CRG BLINDSPOT 2" MIRROR WITH BILLET BAR END MOUNT BAN JIN eavy Duty Starter Clutch Assembly Biltwell  Kung Fu Grips - Black 7/8
    AUTHENTIC CRG BLINDSPOT 2" MIRROR WITH BILLET BAR END MOUNTBAN JIN eavy Duty Starter Clutch AssemblyBiltwell Kung Fu Grips - Black 7/8

    FEATURES: 6160-T6 BILLET ALUMINUM CONSTRUCTION ALL STAINLESS HARDWARE FULLY MODULAR ASSEMBLY (EACH PART CAN BE REPLACED INCLUDING THE MIRROR) WORKS ON BOTH LEFT AND RIGHT DUE TO ELBOW WE INCLUDE THE BILLET INTERNAL ADAPTER FOR VIRTUALLY EVERY...

    Heavy Duty Starter Clutch Assembly for 150cc and 125cc GY6 4-stroke QMI152/157 and QMJ152/157 engines. You will need a clutch tool to install this. See related items below.

    Biltwell grips are available in 7/8” ”. Each size number refers to the outside diameter of the bar end on the left side of your scooter. If you don’t know the O.D. of your handlebars, measure with a caliper, an open-end wrench...

    $64.99

    $37.99

    $17.95

    Biltwell  Recoil Grips - Black 7/8 Biltwell  Thruster Grips - Black 7/8 BLACK NCY ZOOMER 10" REAR Wheel Rim LAST ONE
    Biltwell Recoil Grips - Black 7/8Biltwell Thruster Grips - Black 7/8BLACK NCY ZOOMER 10" REAR Wheel Rim LAST ONE

    Biltwell grips are available in 7/8” ”. Each size number refers to the outside diameter of the bar end on the left side of your scooter. If you don’t know the O.D. of your handlebars, measure with a caliper, an open-end wrench...

    Biltwell grips are available in 7/8” ”. Each size number refers to the outside diameter of the bar end on the left side of your scooter. If you don’t know the O.D. of your handlebars, measure with a caliper, an open-end wrench...

    NEW BLACK Rear Wheel for your Honda Ruckus matches the NCY Big Brake Front End Kit.

    $17.95

    $17.95

    $104.95

    Black Round Bar End mirror  7/8 (22mm) works on either side Cafe style Handlebar Chrome 7/8 CLEAR LED BLINKERS BEZELS ONLY RED OR BLACK
    Black Round Bar End mirror 7/8 (22mm) works on either sideCafe style Handlebar Chrome 7/8CLEAR LED BLINKERS BEZELS ONLY RED OR BLACK

     

    Come stand-out from the crowd with some cafe  style handlebars. chrome

    NEW PRODUCT. CNC LED BEZELS IN BLACK OR RED ANODIZED MADE IN THE USA MADE OF 6160 BILLET AND HARD ANODIZED RED OR BLACK CENTER HOLE 17mm. These are if you already have the TRS LED from us.

    $15.00

    $26.99

    $19.99

    CLEAR LED BLINKERS W/ AMBER LED PAIR CLEAR LED BLINKERS W/ AMBER LED PAIR WITH CNC BEZEL RED OR BLACK CNC Billet Controls  levers for Drum / Disc Brake  7/8 bar BLACK
    CLEAR LED BLINKERS W/ AMBER LED PAIRCLEAR LED BLINKERS W/ AMBER LED PAIR WITH CNC BEZEL RED OR BLACKCNC Billet Controls levers for Drum / Disc Brake 7/8 bar BLACK

    NEW PRODUCT. SUPER BRIGHT AMBER LED IN CLEAR HOUSING. 1 INCH DIAMETER. PERFECT FIT FOR BATTERY BOX MOUNTING Features: Ready to Mount high intensity LED's: Recess / Flush mount LED's mount out of sight and out of the way. Dimensions: Indicator...

    NEW PRODUCT. SUPER BRIGHT AMBER LED IN CLEAR HOUSING. 1 INCH DIAMETER. PERFECT FIT FOR BATTERY BOX MOUNTING Features: Ready to Mount high intensity LED's: Recess / Flush mount LED's mount out of sight and out of the way. Dimensions: Indicator...

    CNC Billet control CRG Style Top Quality with Brake Switch IMPORTED FROM ENGLAND. Left for Clutch or Drum Brake Right for Disc Brake. SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN . We also install American Made O-ring in cup to help...

    $29.99

    $45.00

    $159.99

    CNC Round Bar End mirrors - Black Complete Front Hub w/ rotor adapter w/ all bolts included Composimo / TRS  Mikuni DF-44 Fuel Pump & GY6 Coil Bracket
    CNC Round Bar End mirrors - Black Complete Front Hub w/ rotor adapter w/ all bolts includedComposimo / TRS Mikuni DF-44 Fuel Pump & GY6 Coil Bracket

    CNC Billet Round Bar end Mirrors Specifications CNC machined Billet Aluminum Stainless Steel grab screw lock mirrors into place 4x mounting positions convex glass mirror diamter 7cm Fits 7/8 (22mm) handlebar Features A unique combining bar end...

    Professional Crafted front Billet Hub for 4x90 pattern front wheels (common monkey wheels as well as most ruckus custom wheels on the market, with Brake Adapter flange, 3 Titanium Finish Rotor, 3 Stainless bolts to attach adapter plate, and...

    A GREAT answer as to where to put that ugly coil! Mount it down out of the way with your fuel pump, and hide them! This clever mount is designed to use the 2-bolt type coils, along with the popular Mikuni DF-44 Fuel Pump! With this bracket you...

    $44.99

    $140.00

    $124.60

    $45.00

    Composimo Honda Ruckus Headlight Lowering Kit - Bolt-On! Composimo Ruckus GY6 Uber Fatty Stance Mount. SALE END 8/1 cOMPOSIMO Ruckus Headlight Frame Lowering Bracket - Weld-on!
    Composimo Honda Ruckus Headlight Lowering Kit - Bolt-On!Composimo Ruckus GY6 Uber Fatty Stance Mount. SALE END 8/1cOMPOSIMO Ruckus Headlight Frame Lowering Bracket - Weld-on!

    Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower,

    Ruckus gy6 conversion mount. Allows you to run the 12x8 or 10x8 Fatty rim. Comes with clocking flange. Carb must face forward. 12.5 stretch

     

    Still running stock lights? Well make them look even BETTER by lowering them a bit, and getting them closer to the front wheel, and not looking like they are always sky-high all the time! Bracket comes in raw metal. you must paint or powdercoat yourself

    $48.00

    $398.00

    $338.30

    $26.00

    DANMAXX GY6 ENGINE SWAP HARNESS W/ CDI , RELAY, COIL , REC. DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 DAYTONA Power advance - Super high speed pulleyKit  RUCKUS
    DANMAXX GY6 ENGINE SWAP HARNESS W/ CDI , RELAY, COIL , REC.DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110DAYTONA Power advance - Super high speed pulleyKit RUCKUS

    Parts Shop MAX Honda Ruckus 150cc GY6 motor swap harnes with CDI , COIL , RECTIFIER, AND STARTER RELAY WHEN BOUGHT THROUGH THE RUCK SHOP. MAX GY6 Ruckus Wire Harness Features: ~ Made for GY6 motor with stock or aftermarket controls ~ More...

    Dual Pattern, 4 lug 4 inch lug spacing, four 12mm x 1.25 thread studs, for use with golf cart wheels OR 4x110 ATV pattern M10mmX 1.5MM For use with wheels measuring 3 inch back spacing and 4 or 5 inch front spacing 10 or 12 inch dimeter is OK....

    DAYTONA Power advance - Super high speed pulleyKit IMPORTED FROM JAPAN. FOR HONDA RUCKUS ZOOMER. USES 15X12 ROLLER WEIGHT. COMES WITH A SET OF 6 GRAMS

    $175.00

    $150.00

    $88.00

    Doppler Roller Weights 16X13 Dr  Pulley Sliding Sliders 16x13 Roller weights DYNA BEADS TIRE BALANCING CERAMIC BEADS
    Doppler Roller Weights 16X13Dr Pulley Sliding Sliders 16x13 Roller weightsDYNA BEADS TIRE BALANCING CERAMIC BEADS

    Doppler Roller Weights 16X13 ONLY THE BEST

    Expect better performance from your scooter, period. No matter what stage you are in upgrading your scooter, simply add Dr. Pulley weights and a kevlar belt for a power upgrade. Dr. Pulley roller weights are the most advanced weights available....

    Motorcycles and Scooters ride s-m-o-o-t-h with Dyna Beads ®! You simply won't believe the ride... Glass smooth ride, every time, all the time. Dramatically longer tire life No rebalancing No spoke or rim weights Eliminates tire cupping. Easy...

    $24.99

    $19.99

    $15.99

    Exhaust Cap Nuts for GY6 150cc/125cc,QMB139, & Honda 50cc engine Exhaust studs for GY6 150cc/125cc,QMB139, & Honda 50cc engine Extension Billet Aluminum 6.5 INCH Honda Ruckus W/ CABLES
    Exhaust Cap Nuts for GY6 150cc/125cc,QMB139, & Honda 50cc engineExhaust studs for GY6 150cc/125cc,QMB139, & Honda 50cc engineExtension Billet Aluminum 6.5 INCH Honda Ruckus W/ CABLES

    Exhaust Cap Nuts for GY6 150cc/125cc and QMB139 50cc engines.

    Exhaust Cap Nuts for GY6 150cc/125cc,QMB139, & Honda 50cc engines .

    Stretch the rear end of your Honda Ruckus / Zoomer 6.5 inches with the NCY Billet Aluminum Frame Extension Kit! This can only be described as the cleanest Frame Extension kit on the market to date. We went out of our way to design an extension...

    $2.99

    $1.99

    $159.99

    Extension Billet Aluminum 6.5 INCH Honda Ruckus W/ CABLES -BLACK FLP KYMCO HUB ADAPTER 4/110 4X4 AND 4/90 BOLT PATTERN FUEL FILTER 90 TURN HORIZONTAL
    Extension Billet Aluminum 6.5 INCH Honda Ruckus W/ CABLES -BLACKFLP KYMCO HUB ADAPTER 4/110 4X4 AND 4/90 BOLT PATTERNFUEL FILTER 90 TURN HORIZONTAL

    Stretch the rear end of your Honda Ruckus / Zoomer 6.5 inches with the NCY Billet Aluminum Frame Extension Kit! This can only be described as the cleanest Frame Extension kit on the market to date. We went out of our way to design an extension...

    Looking to run 4/110 wheels on your GET ? We have adapters in stock. Hub adapter has 4/110 , 4X4 and TRS 4/90 bolt pattern. You will need to run a 4+4 offset wheel since adapter is 1" think. Call us for detail as we have 12x8 4+4 Rims in stock....

    PERFECT STOCK OEM REPLACEMENT FUEL FILTER

    $164.99

    $95.00

    $2.99

    Gates Power Link Premium BELT HONDA RUCKUS GIFT CERTIFICATE IN $25, $50, $75 OR $100 GJMS AXLE PROTECTORS IMPORTED - BLACK 12MM TAIWAN
    Gates Power Link Premium BELT HONDA RUCKUSGIFT CERTIFICATE IN $25, $50, $75 OR $100GJMS AXLE PROTECTORS IMPORTED - BLACK 12MM TAIWAN

    Gates Premium Power Link drive belt size 785X17.9X30 for the HONDA RUCKUS. Specifically designed for a variety of motorized CVT applications including street-legal scooters and go-karts.

     

    HAVE SOMEONE SPECIAL THAT IS HARD TO SHOP FOR ON THEIR BIRTHDAY, HOLIDAY, OR JUST A SPECIAL OCCASION. THE RUCK SHOP HAS YOU COVERED. ORDER A GIFT CERTIFICATE IN $25,$50,$75 OR $100 DOLLAR DONOMIATIONS. EACH GIFT CERTIFICATE HAS A UNIQUE CODE THAT...

    GJMS 12MM BLACK AXLE PROTECTORS IMPORTED. NOT FOUND IN STATES. FREE SHIPPING

    $24.99

    $0.00

    $29.99

    GY6 30mm CVK Carburetor w/ electric choke Taiwan GY6 CVK Main Jet Kit  jets 100-140 sizes GY6 Intake Manifold Clocking Flange
    GY6 30mm CVK Carburetor w/ electric choke Taiwan GY6 CVK Main Jet Kit jets 100-140 sizesGY6 Intake Manifold Clocking Flange

    30mm High Performance, After-Market CVK Carburetor for 150cc and 125cc GY6 4-stroke engines found on full-size street legal scooters, ATVs and off-road karts. Includes accelerator pump Air Filter Mount (outer diameter)

    Keihin Round Style Main Jet Kit Includes The Following Sizes: 100, 105, 108, 110, 114, 115, 120, 125, 130 & 140 10 Piece Set Has 1 of Each Size Thread Size: M5x0.80 Overall Length: 8mm

    Are you running a fatty, and have problems with the intake manifold hitting the frame? Like This: Or would you just like the forward-facing carb to sit more on-center in the bike to look better? Like this: Then you NEED this product! The CNC cut...

    $149.00

    $19.99

    $30.99

    GY6 Starter Clutch Nut Tool H4 12V 35/35W HEAVY DUTY HEADLIGHT  BULB GE HARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR)
    GY6 Starter Clutch Nut Tool H4 12V 35/35W HEAVY DUTY HEADLIGHT BULB GEHARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR)

    Starter Clutch Nut Removal Tool, 1/2" Drive x 4 Prong Clutch Tool. Allows you to remove the starter clutch nut from 125cc/150cc/180cc, 4-stroke GY6 engines commonly found in Scooters, ATVs, Carts, Buggies and UTVs.

    H4 12V 35/35W HEAVY DUTY HEADLIGHT BULB GE

    HAVING ISSUES BLEEDING MASTER CYLINDER GET THESE BANJO WASHERS WITH SEAL COMES IN A PAIR WILL NEED 2 SETS IF YOU ARE DOING FRONT BRAKES. ONE SET FOR MASTER CYLINDER ONE SET FOR CALIPER SIDE.

    $23.99

    $14.99

    $2.99

    HONDA LOWER RACE FOR STEERING STEM TRIPLE TREE FREE SHIPPING HONDA MET FINAL GEAR 45T NEW OEM FREE SHIPPING HONDA METROPOLITAN FUEL SENDING UNIT KIT
    HONDA LOWER RACE FOR STEERING STEM TRIPLE TREE FREE SHIPPINGHONDA MET FINAL GEAR 45T NEW OEM FREE SHIPPINGHONDA METROPOLITAN FUEL SENDING UNIT KIT

    JUST ORDERED THE NCY TRIPLE TREE DON'T WASTE TIME BEATING THE OLD RACE OUT OF YOUR STOCK FORK SET UP RACE, STEERING CONE (LOWER) 53212-GEE-000

    Looking to go a little fast. Change your ruckus final gear from a 43t to the METROPOLITAN'S 45t gives you those extra miles per hour you are looking for. IN STOCK PART #6 IN DIAGRAM

    BRAND NEW Sealed Honda OEM fuel sending unit. Stage6 LCD gauge requires this in order to work properly in Honda Ruckus. Direct bolt in. Comes with new gasket. Parts circled are what kit comes with.

    $9.99

    $64.00

    $51.64

    HONDA OEM  MET COMPLETE GEAR SET 45T HONDA OEM EXHAUST GASKET HONDA OEM RUCKUS DRIVE FACE
    HONDA OEM MET COMPLETE GEAR SET 45T HONDA OEM EXHAUST GASKETHONDA OEM RUCKUS DRIVE FACE

    MET GEAR SET FOR 20% BETTER FINAL GEAR.

    COMES WITH 45T FINAL GEAR

    13T COUNTERSHAFT

    42T COUNTERGEAR.

     

     

     HONDA OEM EXHAUST GASKET. NUMBER 1 IN PIC.

    IN STOCK FREE SHIPPING

    HONDA OEM DRIVE FACE IN STOCK NO WAITING FOR HONDA TO ORDER. WE HAVE THEM IN STOCK

    #2 IN PICTURE

    $112.95

    $4.99

    $26.99

    HONDA OEM STYLE  FUEL FILTER 90 TURN HORIZONTAL HONDA RUCKUS / METROPOLITAN AIRBOX ELIMINATOR KIT Type 1 HONDA RUCKUS / METROPOLITAN AIRBOX ELIMINATOR KIT Type 2
    HONDA OEM STYLE FUEL FILTER 90 TURN HORIZONTALHONDA RUCKUS / METROPOLITAN AIRBOX ELIMINATOR KIT Type 1HONDA RUCKUS / METROPOLITAN AIRBOX ELIMINATOR KIT Type 2

    PERFECT STOCK OEM REPLACEMENT FUEL FILTER

    Another Ruck Shop First. Here it is. Everything you need to eliminate your stock Honda / Metropolitan air box with the most popular parts. When you remove your stock air box you will need to re-jet the carburetor. We recommend you add a...

    Another Ruck Shop First. Here it is. Everything you need to eliminate your stock Honda / Metropolitan air box with the most popular parts. When you remove your stock air box you will need to re-jet the carburetor. We recommend you add a...

    $2.99

    $59.99

    $68.99

    HONDA RUCKUS / ZOOMER REAR FLUSH MOUNT LED TAILLIGHT HONDA RUCKUS 10X5 MINI FATTY W/ TIRE BOLT ON Honda Ruckus Battery Box nut Clip
    HONDA RUCKUS / ZOOMER REAR FLUSH MOUNT LED TAILLIGHTHONDA RUCKUS 10X5 MINI FATTY W/ TIRE BOLT ONHonda Ruckus Battery Box nut Clip

    Looking to run a flush taillight that is high and tight. Look no farther. The TRS FLUSH MOUNT LED uses a quality made in the USA Light one of the brightest in the industry.

    Here you go a Douglas polished 10x5 mini fatty wheel with a new 130/90-10 Michelin Bopper installed. Wheel has been fitted with a Kymco Hub bolted and trued. Test ridden once to make sure wheel is correct. NO need to find a tire shop to mount...

    Lost that battery box nut clip. You can't find these at Home Depot. #16 in the picture 

    $82.00

    $249.00

    $2.99

    Honda Ruckus Battery Box Special Screw HONDA RUCKUS CARB CONNECTOR (INSULATOR) HONDA RUCKUS Carbon Fiber Tank cover High end and Thick
    Honda Ruckus Battery Box Special ScrewHONDA RUCKUS CARB CONNECTOR (INSULATOR) HONDA RUCKUS Carbon Fiber Tank cover High end and Thick

    Lost that battery box screw. You can't find these at Home Depot. #14 in the picture 

    IS YOUR CARB CONNECTOR RIPPED OR HAVE A LEAK FROM REMOVING THE CARB OVER AND OVER OR JUST DRY ROTTEN. HERE IS A NEW ONE HONDA OEM NUMBER 6 IN THE DIAGRAM. CONNECTOR BAND ARE NOT INCLUDED.

    This carbon fiber gas tank cover gives the Ruckus a high end and indestructable look. Nice and thick

    $1.99

    $23.05

    $158.00

    HONDA RUCKUS CLUTCH PADS Honda Ruckus Engine Stretch 9.5"  Extension for the 49cc engine Honda Ruckus Frame Splitter Alumunum Imported Ships Free
    HONDA RUCKUS CLUTCH PADSHonda Ruckus Engine Stretch 9.5" Extension for the 49cc engine Honda Ruckus Frame Splitter Alumunum Imported Ships Free

    Worn or glazed clutch pads. We have then in stock  Parts included are circled in Picture. Comes 2 pk[!brand:honda!][!mpn:22535-gbl-305!]

    HONDA RUCKUS ZOOMER ENGINE 9.5" STRETCH KIT FITS ALL NPS-50 2003-2013 FULLY TESTED AND PERFECT FIT. COMES WITH HARDWARE AND EXTENDED FUEL LINE. YOU MAY NEED A NCY OR LOW DOWN SHOCK FOR THAT STANCE LOOK. If you are using stock handle bars you will...

    The Honda Ruckus Frame Splitter is an easy way to cover up your coil and fuel pump? . Designed to fit over the fuel tank or its cover, the Frame Splitter really helps cover the rear section of the front sub-frame nicely when compared to the...

    $39.99

    $159.95

    $29.00

    $27.54

    HONDA RUCKUS FRONT FRAME COVER GUARD FREE SHIPPING HONDA RUCKUS front or Rear Brake Shoes Pads Honda Ruckus GET, GY6, ZUMA   License Plate Mount 12 position
    HONDA RUCKUS FRONT FRAME COVER GUARD FREE SHIPPINGHONDA RUCKUS front or Rear Brake Shoes PadsHonda Ruckus GET, GY6, ZUMA License Plate Mount 12 position

    Removing the OEM front frame plastics can really leave your Honda Ruckus looking bare. Well, TRS comes to the rescue with their Honda Ruckus Front Frame Cover. Cut out of 6061 billet Aluminum not just a cheap plate. These covers are attractive...

    Front or Rear Brake shoes for Honda Ruckus

    OTTO FACTORY GY6 License Plate Mount with all hardware. Can be mounted Vertical or horizontal. Powder Coated in Black with Stainless Hardware. Mounts on the GY6 CVT case and allows you to run your plate 6 different ways. If you like it vertical...

    $64.99

    $17.99

    $38.99

    HONDA RUCKUS IGNITION KEY AND LOCK SET HONDA RUCKUS KICKSTART RACHET AND WASHER HONDA RUCKUS MET ZOOMER LED LIGHT FLASHER RELAY
    HONDA RUCKUS IGNITION KEY AND LOCK SET HONDA RUCKUS KICKSTART RACHET AND WASHERHONDA RUCKUS MET ZOOMER LED LIGHT FLASHER RELAY

    HONDA RUCKUS OEM COMPLETE IGNITION SET. COMES WITH IGNITION, GAS CAP AND HELMET LOCK AND KEY. NUMBER 8 IN DIAGRAM

    HONDA RUCKUS KICKSTART RACHET AND WASHER HONDA OEM PARTS

    HONDA RUCKUS LED FLASHER RELAY WITH INSTRUCTIONS AND GROUND ALREADY WIRED. Looking to add LED Blinkers or brake lights to your scooter? You will need either a set of in-line resistors for the circuit or replace the OEM flasher with our LED...

    $127.27

    $11.00

    $13.99

    Honda Ruckus Metropolitan Header Exhaust Flange Honda Ruckus Metropolitan REED PAR PAIR Valve Block Off 3 TYPES HONDA RUCKUS OEM  NEW COMPLETE SEAT BLACK 03-13
    Honda Ruckus Metropolitan Header Exhaust Flange Honda Ruckus Metropolitan REED PAR PAIR Valve Block Off 3 TYPESHONDA RUCKUS OEM NEW COMPLETE SEAT BLACK 03-13

    HONDA RUCKUS METROPOLITAN HEADER EXHAUST FLANGE STEEL FOR A 3/4 o.d. (.75 od) TUBE . USE FOR CUSTOM EXHAUST FREE SHIPPING

    If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate....

    THIS IS A COMPLETE SEAT BRAND NEW OEM. COMES WITH COVER, SEAT, PAD, ALL SCREWS AND HARDWARE. PERFECT FOR SOMEONE DOING A METRUCK.

    COMES WITH PARTS 2,5,12, AND 11 ON DIAGRAM. SEAT IS BLACK

    $12.00

    $18.99

    $149.99

    HONDA RUCKUS OEM CLUTCH SPRING Honda Ruckus Side Steps Alumunum Imported, Ships Free Honda Ruckus Under Seat Storage Container / Cargo Bin Drop in
    HONDA RUCKUS OEM CLUTCH SPRING Honda Ruckus Side Steps Alumunum Imported, Ships Free Honda Ruckus Under Seat Storage Container / Cargo Bin Drop in

    HONDA RUCKUS OEM CLUTCH SPRING.

    ITEM # 3 IN PICTURE

    SOLD INDIVIDUAL FREE SHIPPING

     

    Honda Ruckus / Honda Zoomer black ABS plastic under seat storage tray. This tray gives the Ruckus a much needed storage space under the seat. You can easily store items such as tools, food, or Drinks. This tray is easily installed and removed....

    $3.95

    $29.00

    $64.99

    HOTLAP SIDEWINDER V2 RUCKUS FATTY  EXHAUST Imported Japanese Roller Weights Honda Ruckus In-Line Resistor for LED signals 10w 3 OHM
    HOTLAP SIDEWINDER V2 RUCKUS FATTY EXHAUSTImported Japanese Roller Weights Honda RuckusIn-Line Resistor for LED signals 10w 3 OHM

    All pipes are handmade in Japan by HotLap. The headers and exhaust canisters are built specifically for the Honda Ruckus and built from scratch. They are not reworked headers/pipes like some of the competitors’ options. Very clean with...

    Imported from Japan inexpensive awesome roller weights in half gram increments. OPTIONS 4.5,5.5,OR 6.5

    Corrects the fast-flash problem when using LED turn signals. Simple splice in installation. Sold in pairs - connectors included. NO NEED TO BUY A LED FLASHER that May or MAY NOT work.

    $425.00

    $9.99

    $12.95

    JDM IMPORTED ZOOMER CLEAR W/ AMBER BULB BLINKERS TURN SIGNALS KCP Coolbox Coolant Radiator Resevior  Honda Ruckus Zoomer Met KCP Float-X headlight frame RAW OR ANODIZED BLACK IMPORTED
    JDM IMPORTED ZOOMER CLEAR W/ AMBER BULB BLINKERS TURN SIGNALSKCP Coolbox Coolant Radiator Resevior Honda Ruckus Zoomer Met KCP Float-X headlight frame RAW OR ANODIZED BLACK IMPORTED

    Imported from Japan. Clear with amber bulbs Fits: Universal Description: Color : Rear disc Cowl blinker Two Bulbs used : G14 : 12V10W The Turn of the type mounted on the cowl. The mounting hole processing is required.

    INSTOCK READY TO SHIP CLEAR COOLANT RESEVOIR TANK FOR HONDA RUCKUS ZOOMER OR METROPOLITAN. COMES IN RAW OR BLACK ANODIZED. MADE IN EUROPE AND IMPORTED. * CNC'd Aluminium caps * Stainless mounting bracket * This product will NOT fit with the stock...

    KCP Float-X headlight frame, cleanest way to rock the original bug eyes. Period. Both raw and black version are in stock and ready to ship! * Parts are all billet aluminum, 4 piece modular design * Stainless hardware included *

     

    $49.99

    $79.00

    $234.00

    KEIHIN RUCKUS MAIN JET CHOOSE SIZE 78 - 88 KITACO Power drive kit Type 3 for RUCKUS METRO ZOOMER KYMCO HUB FOR HONDA RUCKUS 4/140 BOLT
    KEIHIN RUCKUS MAIN JET CHOOSE SIZE 78 - 88KITACO Power drive kit Type 3 for RUCKUS METRO ZOOMERKYMCO HUB FOR HONDA RUCKUS 4/140 BOLT

    OEM MAIN JETS for HONDA RUCKUS CHOOSE FROM #78-88 FREE SHIPPING

    Acceleration performance is one of the best. COMPLETELY NEW DESIGN VERSION 3. IMPORTED FROM JAPAN. * When assembled, using a torque wrench and must be holders of fixed-and rotary, please go to the specified tightening torque.. Please note that...

    LOOKING TO RUN A FATTY RIM ON A HONDA RUCKUS MOTOR HERE'S THE HUB YOU NEED. WILL REQUIRE YOU TO REMOVE THE STUD AND USE BOLTS TO USE ON AFTERMARKET WHEEL. HUB HAS 4/140 BOLT PATTERN.

    $10.99

    $89.99

    $59.99

    LED Stop, run, turn signals BAR V light Left Handle Switch - BLACK used with CNC levers SHIPS FREE Left Handle Switch to use with CNC levers  V2  FREE SHIPPING
    LED Stop, run, turn signals BAR V lightLeft Handle Switch - BLACK used with CNC levers SHIPS FREELeft Handle Switch to use with CNC levers V2 FREE SHIPPING

    7" wide all in one stop, turn, and running light. Simple 5 wire installation. Very bright low current 12v. Turn signals are amber colors, running/brake is red. Installation bolts included

     

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual.

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual. 

    $41.95

    $25.00

    $9.99

    Left Handle Switch to use with CNC levers  V3  FREE SHIPPING Malossi Variator (Performance); Honda Ruckus Zoomer Michelin Power Pure SC 140/70-12 M/C Tire
    Left Handle Switch to use with CNC levers V3 FREE SHIPPINGMalossi Variator (Performance); Honda Ruckus ZoomerMichelin Power Pure SC 140/70-12 M/C Tire

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual.  v3 ALL BLACK BUTTONS

    Performance Malossi Variator for the Honda Ruckus. Will help eliminate that annoying bog after initial take-off. Multivar is very easy to fit and to modify. It is developed in detail and for specific applications. With a variator that features...

    Michelin Pilot Power Pure SC REAR Tire World’s first dual compound technology scooter tire (2CT) Increased safety, grip, sportiness and longevity Delivers feedback and grip in all driving conditions Slick central portion puts more rubber on...

    $15.99

    $127.90

    $62.38

    MOTOFORCE roller weights 16x13 FREE SHIPPING Multi Function Pocket Tool Multi Tool with Sockets
    MOTOFORCE roller weights 16x13 FREE SHIPPINGMulti Function Pocket ToolMulti Tool with Sockets

    Imported from Italy Racing Roller Weights for your Honda Ruckus lots of sizes to choose from. FREE SHIPPING TO 48 us states

    Aluminum body for lighter weight. Anodized for corrosion protection and great looks. Compact size packs multi function utility. Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and flat head screwdrivers.

    Aluminum body for lighter weight. Anodized for corrosion protection and great looks. Compact size packs multi function utility. Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and flat head screwdrivers.

    $15.99

    $13.99

    $12.99

    NCY 12MM X 250MM NEO CHROME AXLE FOR RUCKUS DISC KITS NCY BANJO BOLT W/ BLEEDER - BLUE NCY BEARING QUICK THROTTLE TUBE HONDA BLACK
    NCY 12MM X 250MM NEO CHROME AXLE FOR RUCKUS DISC KITSNCY BANJO BOLT W/ BLEEDER - BLUENCY BEARING QUICK THROTTLE TUBE HONDA BLACK

    NCY 12MMX250MM. Got that RRGS fork kit but no axle. Same axle that comes in the NCY Front Kit. Get it NOW.  Not found in States IMPORTED

    Hydraulic banjo bolt with bleeder valve. Supplied with two sealing washers. When doing a disk conversion in tight quarters, these bolts allow for easy access to bleed your system.

    Sold Individually.

     

    IMPORTED NCY QUICK THROTTLE TUBE WITH BEARINGS FOR SMOOTH ACTION. 7/8" CHOOSE EITHER BLACK AND GUNMETAL

    $33.99

    $9.99

    $64.99

    NCY Brake Cable for Frame Extension Kit; Honda Ruckus +6 NCY CALIPER ADAPTER 2 PISTON CALIPER NCY Desert Eagle Sidestand Kickstand (Silver); Honda Ruckus
    NCY Brake Cable for Frame Extension Kit; Honda Ruckus +6NCY CALIPER ADAPTER 2 PISTON CALIPERNCY Desert Eagle Sidestand Kickstand (Silver); Honda Ruckus

    Replacement NCY brake cable for the following Honda Ruckus frame extension kits: 0300-0012 PASSWORD EXTENSION Overall length: 83.5"

    NCY caliper adapter. Looking to run RRGS, DIO or NCY fork but don't want to spend a fortune on Brake set up. This bracket fits on most aftermarket NCY and RRGS forks and allows you run a NCY

     

     

     

    A high-end, chrome plated aluminum side stand for your Ruckus. It won't look like any other Ruckus around. High quality part from NCY.

    $17.99

    $34.99

    $98.99

    NCY Exhaust Pipe Nuts (8mm, Sold in Pairs) NCY Forged Brake Caliper 2 piston - black NCY Front End Kit Rim Replacement (Black, 10 Spoke); Ruckus
    NCY Exhaust Pipe Nuts (8mm, Sold in Pairs)NCY Forged Brake Caliper 2 piston - black NCY Front End Kit Rim Replacement (Black, 10 Spoke); Ruckus

    Installing a big valve head or large diameter pipe? These nuts are essential. The smaller, 10mm diameter head allows for extra clearance between your wrench and the pipe for easy access.

    Standard 8mm thread diameter.

    NCY FORGED 2 PISTON FRONT BRAKE CALIPER W/ PADS. YOU WILL NEED BANJO FITTING AND BANJO BOLT.

    Replacement 10", ten spoke front rim for the new NCY Honda Ruckus. Must have front Disk set up.  WE HAVE AN EXCESS OF THESE RIMS IN STOCK OUR LOSS YOUR GAIN.

     

    $3.99

    $107.99

    $75.00

    NCY Front End Kit, (Carbon Fiber) ; Honda Ruckus NEW 2013 MODEL NCY Front End Kit, (POLISHED) ; Honda Ruckus NEW 2013 MODEL NCY Front End Kit, (Titanium Grey) ; Honda Ruckus NEW 2013 MODEL
    NCY Front End Kit, (Carbon Fiber) ; Honda Ruckus NEW 2013 MODELNCY Front End Kit, (POLISHED) ; Honda Ruckus NEW 2013 MODELNCY Front End Kit, (Titanium Grey) ; Honda Ruckus NEW 2013 MODEL

    NEW STYLE NCY Honda Ruckus / Zoomer Big Brake Kit. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer. Shocks have a high quality titanium grey finish. Includes: Front fork / shock Dual...

    NEW STYLE NCY Honda Ruckus / Zoomer Big Brake Kit. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer. Shocks have a high quality titanium grey finish. Includes: Front fork / shock Dual...

    NEW STYLE NCY Honda Ruckus / Zoomer Big Brake Kit. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer. Shocks have a high quality titanium grey finish. Includes: Front fork / shock Dual...

    $459.00

    $419.00

    $419.00

    NCY Glock Sidestand Kickstand (Black) Honda Ruckus Zoomer NCY Oil Cooler; GY6 / GET/  Genuine SALE NCY Performance Brake Pads (Front)  Ruckus Zoomer
    NCY Glock Sidestand Kickstand (Black) Honda Ruckus ZoomerNCY Oil Cooler; GY6 / GET/ Genuine SALENCY Performance Brake Pads (Front) Ruckus Zoomer

    The new "Glock" NCY sidestand, for the Honda Ruckus, provides a sinister look as well as a sense of security. Strong, billet construction combined with a durable textured matte-black finish. Add some fire-power to the look of your Ruckus!

    This oil cooler kit is the perfect addition to your high performance or bone stock GY6. More oil, cooler oil, equals lower engine temperatures, longer oil life and longer engine life in all riding conditions. Includes all hardware and lines to...

    Performance NCY front brake pads for Genuine Buddy 50.  The pad compound is long-wearing and ensures the best stopping power for your Buddy.

    These also work with the NCY Honda Ruckus front end kits.

    $78.99

    $175.00

    $20.99

    NCY Performance High Tension Coil and Cap; ZOOMER RUCKUS NCY PERFORMANCE SHOCK SHORT BLACK NCY Ruckus Footpegs for Footrest Kit (Black); pair
    NCY Performance High Tension Coil and Cap; ZOOMER RUCKUS NCY PERFORMANCE SHOCK SHORT BLACKNCY Ruckus Footpegs for Footrest Kit (Black); pair

    Two prong high tension coil. Provides solid and consistent spark and increased ignition power. Fits Honda Ruckus and Metropolitan This also includes the spark plug cap!

    High-quality, NCY-built rear performance shock for Honda's Ruckus improves ride, handling, and looks great - this part is sure to improve your Ruckus and finish your custom build in style! Measurements:

    Black foot pegs for the NCY Ruckus footrest. made from Aluminum

    $31.50

    $99.00

    $50.99

    NCY Slammed Front End Kit (All Black); Honda Ruckus NCY Slammed Front Forks Shocks lower than RRGS NCY UNIVERSAL CNC KEY HEAD  3 COLORS
    NCY Slammed Front End Kit (All Black); Honda RuckusNCY Slammed Front Forks Shocks lower than RRGS NCY UNIVERSAL CNC KEY HEAD 3 COLORS

    NCY Slammed Honda Ruckus / Zoomer Front End Kit. MOAR LOW is the name of the game for our newest exclusive NCY FEK. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer or Metropolitan (with...

     NCY Slammed Honda Ruckus / Zoomer Front End Kit. (THESE ARE NOT THE SAME AS FOUND IN THE SLAMMED FRONT END KIT THEY ARE LOWERED)

    NCY KEY HEAD IN GOLD, RED OR GUN METAL GRAY. NICE LITTLE ADDITION TO YOUR HONDA RUCKUS OR MET.

    NOTE: YOU MUST GRIND OFF TOP OF KEY TO FIT INSIDE SLOT. HAS SET SCREW.

    $679.99

    $215.00

    $14.99

    1 - 120 of 207 items